The MORRFlate+ Off Road 4 Tire Inflation Deflation Kit

$199.99

Due to high order volume, we are currently roughly a week behind on getting orders shipped out. Please take this into consideration when placing your order. We aren’t really back ordered, just having trouble keeping up with all of you crazy people dying to play in the woods with your vehicles!

Inflate, Deflate, and Equalize air pressure in all 4 tires, all at once. See all of the uses below:

– This version fits up to a 155″ wheelbase with the air source in the middle of the front or rear bumper areas.
– Air up 1 to 4 tires simultaneously (Less stress on your compressor!)
– Air down 1 to 4 tires simultaneously (Less stress on you!)
– Check all of the tires’ PSI from the manifold (No more continuously bending over checking PSIs)
– Move air from a spare tire into other tires
– Effortlessly equalize tire pressures
– Make all 4 tires the same pressure
– Run different PSI in the front tires from the back tires
– If you need a shorter wheelbase, check out the MORRFlate Off Road 4 Tire Inflation Deflation Kit
– If your air source is in a different location (such as mounted in your engine bay), check out our MORRFlate Leads
– Don’t forget your MORRFlate Digital Gauge with your order!
– Read the entire MORRFlate Off Road 4 Tire Inflation Deflation Kit article for more detailed information!

SKU: m1003 Category:

Description

 

Since this video we have upgraded the carrying bag that comes with your MORRFlate! It now looks like this!

 

 

Inflate, Deflate, and Equalize up to 4 tires with no installation, and no prep. Just pull your MORRFlate+ out of its storage bag, hook it onto your tires, and grab a drink while all your friends get their squats in.

The MORRFlate+ is made with simplicity and durability in mind. It is rated for up to 22CFM, 140psi, -40 to 150 degrees F. It is kink and abrasion resistant, does not hold memory, and there is no installation required.

It will fit up to 155″ wheelbase vehicles (most full size, dual cab, long bed vehicles) with an air source in the middle of the front bumper, or the middle of the rear bumper.

If you have a shorter wheelbase, check out the MORRFlate Off Road 4 Tire Inflation Deflation Kit (up to 125″ wheelbase).

If your air source is in a different location, check out our MORRFlate Leads.

Don’t forget your MORRFlate Digital Gauge with your order!

To read the complete writeup, check out our article on The MORRFlate Off Road Multi Tire Inflation Deflation Kits.

 

Additional information

Weight5 lbs
Dimensions18 × 14 × 4 in

4 reviews for The MORRFlate+ Off Road 4 Tire Inflation Deflation Kit

  1. K6TLR

    Wow! The construction of the MORRFlate far exceeds what I expected for the price. I priced making my own and, with much inferior materials, it would have cost me 20% more NOT including my time. I was also concerned about the smaller diameter hose but that was quickly dismissed. Here is real data from my personal experience, airing down my BFG A/T tires:

    45 PSI down to 10 PSI- 3 minutes 30 seconds
    10 PSI up to 45 PSI – 5 minutes (using my cheap pancake compressor)

    I air down/up every day during the fishing season so I can launch my boat from the beach. I wish I had this product 15 years ago!

    – Captain Ted

  2. K6TLR

    I don’t like raving about products unless it’s something really worth while and a MUST HAVE. This is called a @morrflate It’s a 4 tire air system that allows you to inflate and deflate all four tires at the same time. Works with any air system. Had an issue with the air sensor after deflating and didn’t realize one tire was 8psi off. When I went to inflate I was able to hook up to all 4 tires and the system evened out all of them. I didn’t have to go to each tire and air up individually. Just hooked it up and waited. Do yourself a favor and go get one. Price is only $180 plus tax depending on add-on’s. Most systems I saw were $1,000 plus and I couldn’t justify spending that. Link to buy on his page!

    instagram.com/trd_warmachine

  3. Simon Walsh

    Outstanding product. Very high quality materials and construction . . . the manifold, the chucks, and the “Flexzilla” hose, which doesn’t kink (same hose I use in my garden). Air down takes about 5 min on 31” tires. AIr up takes about 25 mins with my dinky 1.05 CFM compressor. All tires equalized. Great design and quality. Thank you.

  4. K6TLR

    Man I FINALLY got to test out the morrflate yesterday and I am blown away. I aired down from 35psi to 18 and back up to 35 in NINE MINUTES!

    Hooked up to the Tuff Stuff compressor. I have nothing but good things to say. Build quality, ease, and all the small details down to the carry bag and built in Velcro straps. Super blown away man. Next week is the big trip and I’ll do some video actually using it in the field. 🙌

    instagram.com/overland_az

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…